

150-1715-7171
core

WSF Series Dehumidifying Dryer
DRYING PROCEDURE
By high speed reduction of air pressure in the heatless tower, a verylow Dew Point(-40C)of Dehumidified air will be obtained. Excessiveoil and water content from the compressed air supply will beremoved by micro-filters before been supply to heatlesstower.Continuous injection of-40°C Dehumidified Air(one way supply)into Dryer Hopper, moisture on the plastic material will be removedfrom in the hopper.This is a one-way supply system, regeneration ofair not required.
FEATURES
◆ Stable supply to 40°C(optional -50C) under the dew point of thedehumidification air;
◆ PID temperature control system,low power consumption ,high efficiency (theaverage power consumption of 0.6C-0.8°C/Hr);
◆ Using no-contacting solid state relay control heating (distribution);
◆ All stainless steel feeding system;
◆ Closed circle back dehumidification system;
◆ Standard configuration is 3 injection molding of the raw material supply,thehighest could e configured for 6;
◆ Simple operation layout could understand the condition of machinerunning,clearly;
◆ Intelligent Fault alarm and could make an appointment time, multipleprotection devices;
◆ Optional dew point meter could monitor the dew point at any time;
PARAMETER
| 机型Model | WSF-525 | WSF-550 | WSF-575 | WSF-10100 | WSF-15150 | WSF-20200 |
|---|---|---|---|---|---|---|
| 保温料筒容量(kg) | 25 | 50 | 75 | 100 | 150 | 200 |
| 除湿能力(KG/HRS) | 9 | 17 | 25 | 35 | 48 | 60 |
| 干燥电热功率(KW) | 3.0 | 3.9 | 6.0 | 7.0 | 9.0 | 11 |
| 干燥风机功率(W) | 0.25 | 0.4 | 0.4 | 0.75 | 1.1 | 1.5 |
| 送料风机功率(KW) | 1.1 | 1.1 | 1.1 | 1.5 | 1.5 | 1.5 |
| 吸料机配管(inch) | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 |
| 外型尺(CM) | 68*110*200 | 66*112*210 | 66*112*220 | 84*140*220 | 84*140*232 | 92*150*235 |
| 重量(KG) | 230 | 260 | 280 | 340 | 400 | 450 |









